| 10 amp maximum load.
Pre-programmed for 30, 60 or 90 minutes of ON time per button push.
5600 and 5603 versions can be programmed for up to 2 hours of constant ON time by pressing the button up to 4 times (30 min added per push).
Additional time can be added at any time.
Lights flash per button push to indicate that command is received.
Pushing and holding buttons turns off lights at any time.
"2 minute warning" slowly dims and raises light level prior to shut-off.
9-32 volt operating range.
Must be used in conjunction with 10 amp fuse for circuit protection.
5603 is similar to 5600, but has separate bullet connectors rather than unified plugs.